Material Math

Paint Calculator

Wall area minus doors and windows, times your coats, divided by what a gallon covers. It updates as you type.

Ceilings take their own flat paint — usually one more gallon per 400 sq ft.
2gallons

For 666 sq ft of coverage at 350 sq ft per gallon.

Wall area
333.00 sq ft
Ceiling
—
Total per coat
333.00 sq ft
Coverage needed
666.00 sq ft
Gallons (exact)
1.90
Coverage / gallon
Price / gallon $

Paint cost: $90

How the math works

Wall area is the room's perimeter times the ceiling height. Subtract the openings, multiply by the number of coats, divide by what a gallon covers.

For a 12 × 12 ft room with 8 ft ceilings, one door and two windows:

What a gallon actually covers

SurfaceCoverage per gallon
Primed, smooth drywall350–400 sq ft
Premium interior (Regal Select, Aura)350–450 sq ft
Bare, unprimed drywall250–300 sq ft
Textured or knockdown walls250–300 sq ft
Primer200–300 sq ft

The number on the can is measured on a sealed test panel at the film thickness the manufacturer wants. Your wall is rougher than that panel.

Why everyone says two coats

One coat hides the colour, not the surface. Two coats is about hiding power: patches, sanding marks and old roller stipple disappear on the second pass, and the sheen comes out even. If you skip to one coat, you will see every repair within a week.

The exception is repainting the same colour on a sound wall. That is the one case where one coat is a real answer.

Don't buy four gallons at gallon prices

Contractor-grade interior paint is $34–$52 a gallon, but a 5-gallon bucket is $145–$225 — about $29–$45 a gallon. If the calculator says 4 gallons or more, price the bucket before you buy cans.

Questions people actually ask

How much paint for a 12×12 room?

2 gallons for the walls at two coats. Add 1 gallon of ceiling paint if you are doing the ceiling too. The math is above — 333 sq ft of wall, 666 sq ft of coverage.

Is one gallon enough for a room?

One gallon is 350–400 sq ft at one coat, which is a 10×10 room's walls. A 12×12 room is 333 sq ft of wall per coat, so two coats is 2 gallons.

Should I subtract doors and windows?

Yes, if you are not painting them: 21 sq ft for a standard door, 15 for a standard window. Do not bother for openings under about 15 sq ft — the trim saves you the same area with less arithmetic. If the doors get painted the same colour, add them back.

Do I need primer on new drywall?

Yes. Bare drywall and joint compound drink paint unevenly and you will see every seam through the finish. Use a PVA drywall primer; it covers 200–300 sq ft per gallon. Paint-and-primer-in-one works on previously painted walls, not on bare board.

How long between coats?

2–4 hours for interior latex in normal conditions — but the recoat window on the can wins. If it feels tacky, it is not ready. Knock off any grit with 220 grit before the second coat.

Flat, eggshell or semi-gloss?

Ceilings: flat, always. Living rooms and bedrooms: eggshell — washable without a shine. Kitchens, bathrooms and trim: semi-gloss. Skip flat on walls you will touch; it marks and does not clean.

How much does it cost?

Contractor-grade interior paint is $34–$52 a gallon in 2026, or $145–$225 for 5 gallons. A 12×12 room at two coats is roughly $90–$110 of paint, plus about $25–$40 for tape, a tray, a roller and a drop cloth.

What not to forget